其实我之前用的方法就是把connector section赋予给wire来创建有XY方向刚度的弹簧的方法,但是一直报错:Three factorizations in a row failed. Check the model. It is possible that the model contains the kinematic coupling definition set up in a way that a degree of freedom has neither mass nor stiffness ,这个错误的解决办法我也都试过了,都不管用,所以我才改用soring/dashpot。
现在我找到的方法就是:1.选两个点设置一个X方向刚度的Springs/dashpot,再把这个Springs/dashpot复制一下,再把复制的改成Y方向的刚度的弹簧。这样就可以了。所以在Springs/dashpot中point 1 degree of freedom的选项里:1代表沿X方向,2代表沿Y方向,3代表沿Z方向,4代表绕X轴转动,5代表绕Y轴转动,6代表绕Z轴转动。 我上述的这些都对吧???