Simwe仿真论坛(forum.simwe.com),CAE/CAD/CAM/,FEA/FEM/有限元分析论坛---(手机验证注册)'s Archiver
论坛
›
C01:ANSYS--低频软件(Maxwell \PExprt\Rmxprt\Simplorer)
› vsbv命令出错
zgtly0723
发表于 2015-8-10 16:40:39
vsbv命令出错
在进行电磁感应加热仿真分析时,到vsbv命令是提示“Volume 1 has already been meshed and can not be operated on by the VSBV
command.The command is ignored.Please clear the mesh and issue the
command again”。望各位不吝指导,谢谢!
t@@@
发表于 2015-11-19 18:28:20
把网格单元删了,重新切割!!!!
页:
[1]
查看完整版本:
vsbv命令出错