划分网格和加载

captain007 · 发表于 2012-5-1 23:50:15

小弟想做一个球面，et为fluid29，将球面划分网格然后在nodes加“速度”载荷。建模如图，amesh后出现错误.但是换用结构单元et，1,63就不会有错误，如图。求指教。。

ansys_hf_acous · 发表于 2012-5-2 03:14:45

FLUID29 is a 2d element; SHELL63 is a 3d shell element.

captain007 · 发表于 2012-5-2 14:28:55

ansys_hf_acous 发表于 2012-5-2 03:14
FLUID29 is a 2d element; SHELL63 is a 3d shell element.

Thanks。But if i want to simulate the acoustic environment ,how about FLUID30? Or I just can't AMESH the element?

zhifeng_yao · 发表于 2012-5-2 19:40:30

学习一下。

ansys_hf_acous · 发表于 2012-5-3 00:31:43

本帖最后由 ansys_hf_acous 于 2012-5-3 00:36 编辑

captain007 发表于 2012-5-2 14:28
Thanks。But if i want to simulate the acoustic environment ,how about FLUID30? Or I just can't AME ...

Not sure what you try to simulate. If you want to simulate the sound wave generated by sphere, use 3d acoustic elements.

captain007 · 发表于 2012-5-3 16:21:56

ansys_hf_acous 发表于 2012-5-3 00:31
Not sure what you try to simulate. If you want to simulate the sound wave generated by sphere, use ...

Anyway,thanks

账号		自动登录	找回密码
密码			注册

账号		自动登录	找回密码
密码			立即注册

[声学] 划分网格和加载